4 Easy steps to Hack Into a Computer

Hi there✋. 


Have you ever wondered how easy or possible it is to hack into your pal's computer? Or maybe you know it's possible but do not know the steps to follow. 



I say to you; bring out your note if you ain't with your computer. Keep reading lad.




I've always been asked by viewers on how to hack a computer. I'll be showing you one of my tricks. This trick is done in 4 steps;

  1. Getting started
  2. Trial and error
  3. Gathering necessary information
  4. Getting in

Before you keep reading though, i'll suggest you take a look at our disclaimer page.
Let's get to work!



How to hack into A Computer connected to the same network(Lan)

This trick is perfect for those working in an office where everyone is connected to the same network. It can also be carried out in a College.

What you need

  • Windows OS
  • Cain and Abel

The obvious first thing to do is find a Computer to hack into. You can begin if you're connected to the WAN or plugged into the LAN.

Open up your Cain and Abel. Get it here if you don't have it installed,

This hacking program has a built-in sniffer feature that looks for all available IP addresses in a local subnet. 

Now pay attention!

Step 1

Getting started!

Click on the sniffer tab after the software opens. Click the Start/Stop sniffer, and click the blue cross.

5 Easy steps to Hack Into a Computer



Another window will pop up after this, select “All host in my subnet” and click ok.


It'll now begin to scan

5 Easy steps to Hack Into a Computer


The Computer names, IP's and mac addresses will display. Write them down and try to remember the IP address you wish to hack into. It's okay if you can't tell whether the IP address belongs to a Computer, modem, router etc.

The next step will tell you what to do.




Step 2

Trial and error

This stage is here in case you don't know if what you have is a Computer, printer, router or whatever else is connected to the WAN.

If you did get the IP address of the target though, I still recommend you read through this
section.

Click on the start menu, type in cmd, and click ok.

This will bring up the command prompt which is where you'll be doing most of the hacking.

Next, you'll be reading certain commands in quotes that you'll need to be input into the command prompt. Do not by any way put these commands in quotes. It won't work. I put quotes only to avoid confusing you.

Type in “ping (IP address of the target).” For example in this tutorial, “ping
192.168.1.103.”

This lets you know if the target is online or not

It will look something like this if the target is online.

5 Easy steps to Hack Into a Computer

It will look like this if the target is offline:

5 Easy steps to Hack Into a Computer

This hack can only be done if the target is online. So switch to a different target if it's not or wait for it to come online.

You'd wanna know how to crack a wifi password and a website

Step 3

Gathering necessary information.

Input this command “nbtstat –a (IP address of target).” A suitable example would be
“nbtstat –a 192.168.1.103.”

This will display if file sharing is enabled. If it is, it will give you the; currently logged on user,  computer name and workgroup.

5 Easy steps to Hack Into a Computer



Step 4

Getting In

It’s time!.

By now you should know that: your target is online, has file sharing, and the computer name.

Locate the shared drives or printers. Type “net view (IP Address of Target)”
Example for this tutorial would be: “net view 192.168.1.103”



You just found the share name. In this case, "C" is under the share name signalling that C is the only shared thing on the PC or computer.

To the right, "Disk" is displayed under Type. Meaning that it is the actual C DISK of the computer. The C DISK is most times an entire person’s hard drive.



If you observe carefully, for my hack I already used “K,” so now I use “G” instead. You may do the same for multiple hacks.

It will say “The command completed successfully.” if it worked.

You may have to go retrace your steps if it didn't.

Now open “my computer” under the start menu. There your recently created network
drive will be there.



Note that you won't be able to access this drive if you disconnect from the WAN or LAN. Hence the name Network Drive.

Don't worry though, you won't have to repeat the same procedure all over again since the drive will not be deleted after you disconnect. You can still access it whenever you reconnect.



Congratulations! You’re DONE HACKING!



Commands used;

  • PING
  • NBTSTAT -a (IP Address of Target)
  • NET VIEW (IP Address of Target)
  • NET USE K: (IP Address of Target)(SHARENAME)

Program used;

Cain and Abel.

Pretty easy right? this sums up the steps to hack into a Computer.




Subscribe to my mailing list

* indicates required

0 comments:

Post a Comment